DroidPPPwn
An android frontend that uses PPPwn_cpp_android
- It includes a GUI, PPPwn_cpp binary specifically compiled for arm-android and x86-android, plus stage1.bin + stage2.bin for all supported firmwares (7.00-11.00).
- For firmwares 9.00, 9.60, 10.xx, 11.00
stage2.bin is taken from Sistr0 repository, i.e. you can load GoldHEN payload.
- For firmwares 7.0x, 7.5x, 8.0x, 8.5x, 9.03, 9.04
stage2.bin is taken from EchoStretch ps4-hen-vtx-pppwn, i.e. you can load PS4HEN payload.
- You can use your own
stage2.bin placing it to your external storage root folder through adb push stage2.bin /sdcard/
Requirements
- An Android device with
root access, minimum version Android KitKat 4.4
- An OTG USB Cable or Adapter
- An USB Ethernet Adapter
- An ethernet cable
Alternatively, if your device has an embedded ethernet port, you can use that, as in the case of Android TV boxes.
Usage
- Download the latest release from this repository and install to your android phone.
- On your PS4: follow the instructions from the original PPPwn to configure the ethernet connection.
- Start DroidPPPwn application and select your PS4 firmware.
- Press
Start button on the app and simultaneously X on your controller when you're on the Test Internet Connection screen.
- Wait until the exploit reaches the stage4 and the message is printed on your monitor
- If exploit fails click
Start button again to stop it, and repeat again the last step
Example run here: https://youtu.be/SQT7AgTtrDY
About PPPwn binaries building and packaging
Some explanations about the binaries provided in this package.
In order to obtain execution permission I had to trick the Android Studio packaging system by including a fake pppwn.jar (which is a zip, you'll find in app/libs project folder) to extract all of the binaries in the default app private folder /data/data/it.deviato.droidpppwn/lib/. Right after installation you'll find 4 files extracted in that, they are fake libraries named libXXX.so, which in reality are zip archives too, each one containing a binary for a different architecture (plus the various stage1 and stage2 files).
Once you open the app for the first time, it recognizes your architecture and extracts the appropriate binary. The four files and related architectures are:
- armeabi-v7a/libpppwnkk.so -> for 32bit armv7l, minimum sdk 19 (KitKat 4.4), libc shared build (cannot link static due to some ndk bugs)
- armeabi-v7a/libpppwn.so -> for 32bit armv7l/armv8l, minimum sdk 21 (Lollipop 5.0), static build
- arm64-v8a/libpppwn.so -> for 64bit armv8a+, minimum sdk 21, static build
- x86/libpppwn.so -> for 32bit x86 minimum sdk 21, static build
- x86_64/libpppwn.so -> for 64bit x86 minimum sdk 21, static build
All of the binaries are compiled via the official android NDK r25c, the latest that supports android 4.4.
If you don't like these versions or they don't work well for you, you can just replace the pppwn binary in the folder mentioned above with your favorite one.
If you want to build it on your own, I've forked the original xfangfang repository and modified its CMakeLists.txt to be able to compile for Android, both with NDK on your Linux machine or the Termux app directly on your device. The instructions are in the fork itself here PPPwn_cpp_android.
Known Bugs
Changelog
1.4.1
- Recompiled all binaries to the latest pppwn_cpp version 1.1.0.
- Added an option to select the new "old-ipv6" (-old) parameter from pppwn_cpp (used only when the exploit fails).
- Updated stage2.bin with new GoldHEN version for all 10.xx firmwares.
1.4
- Added an option to automatically run the exploit at start-up as a background service. You can also decide whether the device should be switched off automatically after the exploit has succeeded. NOTE: you may need to grant permission for the app to start automatically, depending on your Android system/device (e.g. for xiaomi go to Settings->Apps->Permissions->Autostart and check DroidPPPwn).
- Cleaned up the code and fixed some minor bugs
1.3.1
- Updated all stage2.bin files for ps4-hen-vtx payload to the latest version of EchoStretch (PPPwn-1.0310).
- Hen support has now been added for 7.0x firmwares too.
1.3
- Added a new pppwn binary build for Android x86_64 architectures.
- Added support to PS4HEN for all the remaining firmwares. Now only the 7.0x versions remain without payload support, but only with the basic PoC.
- Added two options to GUI to set optional parameters -nw (don't wait one more PADI before starting) and -rs (use CPU for more precise sleep time) for pppwn.
- Fixed wrong build for x86 32bit.
- Unified the installer with a single apk package for both standard and 64-bit-only systems.
1.2.3
- Recompiled all binaries updating them to the latest version of pppwn_cpp, which enables some previously non-working PS4-slim.
- Added support for Linux payload for the 11.00 firmware, through a checkbox that allows you to switch between the standard GoldHen stage2 and the LightningMods version.
I preferred to keep the standard payload loader and not incorporate ps4-linux payload into stage2.bin, to leave the choice of 2gb, 3gb, 4gb versions to you. If you want to replace the payload with your own, with preferred hardcoded ps4-linux loader, overwrite the /data/data/it.deviato.droidpppwn/lib/linux.1100 file with your own stage2.
1.2.2
- Updated stage2.bin files to latest version, now you have GoldHen also for 9.60.
- For the other systems, as of now, these are the included stage2.bin for each firmware:
- From 7.00 to 8.52 -> PoC by EchoStretch
- 9.00 -> GoldHen by Sistr0
- 9.03 / 9.04 -> LightningMods + ps4-hen-vtx payload by Sistr0 (NEEDS TESTING)
- 9.50 / 9.51 / 9.60 -> GoldHen by Sistr0 (maybe only 9.60 working?)
- 10.00 / 10.01 -> GoldHen by Sistr0
- 10.50 / 10.70 / 10.71 -> LightningMods + ps4-hen-vtx payload by Sistr0 (NEEDS TESTING)
- 11.00 -> GoldHen by Sistr0
- As usual, you can always put your own stage1.bin and stage2.bin into the root folder of your internal or external storage (/storage/emulated/0 or whatever the symlink /sdcard refers to)
1.2.1
- Changed the method for recognizing the device architecture, which was giving wrong results in some older systems
- Added one more binary for 32bit
armv7, now you have one for Android 4.4 built with shared libc, and one for armv7l/armv8l for Android 5.0+, static linked
- Recompiled all the other binaries with
real static (there was an error in previous version)
- Some minor enhancements
1.2
- Added support for Android x86 and fixed 32bit arm-v7a and 64bit arm-v8a builds (no more bus_error)
- Recompiled all binaries using android NDK instead of Termux environment (cleaner result)
- Added the option to search and select the preferred network interface
- Fixed the issue of binaries not being installed on devices with older Android versions
1.1
- Added support for 32bit arm-v7a with separated binary of pppwn
- Refactored the whole project lowering minSdk to version 19, so now it can run on Android KitKat 4.4+
- Replaced stage2.bin for supported firmwares with those ones from Sistr0 repo to allow loading payloads
- Added the possibility to use your own stage2.bin
- Other small fixes
1.0
