dhackos

Hacker Simulator 2 (dHackOS)

Hacker Simulator 2 - Reincarnation of Hacker Simulator 1

Written using Python 3.6.

Bots, subnets, tracing, upgrades, comfortable prompt, miners, and a lot of interesting things included in this game.

Actual version: 0.3.3b

Installation (Android)

1. Download and install the Termux app.

2. Don't forget to give Termux the "Data/SD/Memory access" rights (If your Android version >= 5.0).

3. Launch Termux.

4. Use cd ~ command to go to Termux home directory.

5. Use pkg install python command to install Python (It's needed to launch the game).

6. Install required modules by commands below:

   apt-get install python-dev clang libcrypt-dev
   pkg install play-audio
   pip install -r requirements.txt
   

7. Use git clone https://github.com/dimankiev/dhackos.git command to download the game

8. Use cd dhackos and python dhackos.py commands to start the game

9. Game will tell you which modules are not installed if you didn't installed them.

10. Have a good time :D

Installation (Windows)

1. Download and install (with administrator rights) the Python (Python version must be >= 3.5).

2. Install required modules by commands below:

   pip install playsound
   pip install -r requirements.txt
   

3. Download the game archive HERE and unzip it to any folder (Example: C:GamesdHackOS)

4. Check that you are administrator of your PC or move the game into your user account desktop.

5. Open cmd and use the commands below to launch the game:

   cd {FOLDER_WHERE_YOU_EXTRACTED_THE_GAME_ARCHIVE}dhackos
   python dhackos.py
   

6. Game will tell you which modules are not installed if you didn't installed them.

7. Have a good time :D

Getting started

1. Create a dHackOS account at start of the game or load the previous game

   • Password can't be less than 6 symbols
   • Please don't forget the password, because it will be used to load saves
   • When you shutting down the dHackOS (game), you can save it
   • Don't try to edit the save, because you can corrupt it

2. Commands:

    apps - list of installed apps + levels
    help - list of console commands
    shutdown - shutdown dHackOS
    scan - scan subnet and search for vulnerable servers
    scan_target - scan an IP and gather information about target server
    balance - opens Ethereum wallet where you can see your Ethereum balance
    load_list - shows you targets list
    dhackosf - start the dHackOS exploitation framework
    upgrade - launch dHackOS programs upgrade CLI
    stats - shows your stats
    change_ip_v - move from IPv4 (old IP version) to IPv6 (new IP version) (Can't be undone)
    version - version of dHackOS
    update_ip - replacing your ip with new one
    miner - show last 10 mined blocks (short log)
    rescan_subnet - rescans subnet to find new targets
    news - show latest cyber security news
    debug_info - shows you debug information
    miner_info - shows you your miner components
    miner_shop
    buy_miner - buy one more miner
    bank - DarkNet Bank CLI
    hilo_game - High/Low Bet Game
    lanhunt - LanHunt Drone System CLI (BETA)
    miner_stat - Show miner power status
    miner_cfg - Switch the miner power on/off
    clear - Clean the screen
   

3. Use scan to find first targets.

4. Then, select and IP and remember it.

5. Launch dHackOS Exploitation Framework by dhackosf command, then enter IP that you remembered. dHackOSf will be launched, then type help to see the dHackOSf commands list.

6. Don't forget to upgrade your apps

7. You can see your statistics by stats command

Requirements

1. Python version >= 3.6

2. Install required modules by commands below:

   pip install -r requirements.txt
   

Links

• dimankiev (Telegram)
• dhackos (Telegram)

Maintainers

• Dmytro Nelipa (Telegram) (GitHub)

Contributors

• Eight Nice (Telegram)

Alpha-testers

• Taptrue(Telegram)

License

Hacker Simulator is BSD-3-Clause Licensed
Copyright © 2018-2024 dimankiev