Iphone 14 15 IRAN Anten

New update of the website to get a free profile:

https://aigptcode.github.io/iphoneprofile/

Free and permanent training to activate the antenna in iPhone 14 and 15 without tracking and closing with two different methods, along with the source code and file to create a unique UUID?

Learning how to make a unique profile

The codes are placed as templates or shells according to all operators, just use the uuid generator written in Python to create new equivalent codes and replace them with the previous ones and save the file.

(Easily convert Python file to exe)

pip install pyinstaller

pyinstaller --onefile --windowed uuid-generator.py

In the templates, for UUID, leave this part and place the new code

 <key>PayloadType</key>
		<string>com.apple.cellular</string>
		<key>PayloadUUID</key>
		<string>کد جدید</string>
		<key>PayloadVersion</key>
		<integer>1</integer>

The reason for closing the configs is due to the use of one UUID by many people

For each phone, try to make it with a unique uuid

When several devices use the same code, it is detected and closed

Also, in the code, the ability to customize a proxy or a dedicated IP is provided for creating a profile and accessing the Internet

The second method

Steps

** Download Apple Configurator or Imazing profile editor **:

• Apple Configurator for macOS
• Imazing Profile Editor for Windows

2. Create a new profile :

   • Run the Apple Configurator program
   • Go to the "File" menu and select "New Profile"

3. Profile settings :

   • Enter your desired name in the "Name" section.
   • In the "Identifier" section, you can leave it blank or create and enter a unique code from the uuid-genarator.py file.

4. APN settings :

   • Look for "cellular" in the menu on the left.
   • In the "Configured APN Type" section, enter the value "mcinet" or "mtnirancell".
   • Be sure to select "CHAP" in the "Data VPN Authentication Type" section.
   • At the bottom of the page, use IP4. If you notice an internet problem, you can do a test with IP6.

5. Test and save :

   • Save the configuration.
   • If the configuration doesn't work, you can create a new configuration with a new UUID and test.

.

Before uploading profiles, do the following:

1. Reset the network first.
2. Send the config file created by any method to the phone and download it and then click on it to open it, then save it to the file?.
3. Then go to the file manager and click on config until a message pops up and it is ready to install.
4. Then enter the settings of the VPN and Device Management section, select the profile and install it.
5. After installation, go to the Cellular Data section, check Data Roaming and VoLTE on 5G or LTE, then turn the phone on and off until the antenna returns?

Now click on the shortcut link?: 6. Click on Anten from the shortcut and install it.

And if the antenna is disconnected, you can restart it by activating Shortcut.

Do you all have antennas?

A few important points:

1. Set to the first mobile network so that the antenna returns better?
2. Do not use two SIM cards in the phone at the same time.
3. If it doesn't work, create a new profile with uuid and test it. Also, for Internet access, especially for Irancell, you can set the IP settings to ip6.
4. Be sure to set the net to 5G?.
5. If you don't have an antenna from 12:00 PM, set the net to 2G, because in some cases, the antenna will automatically return to 8:00 AM.

Also remember that any new profile you want to test, you must delete the previous profile first.

attention

This guide is suitable for setting up a mobile phone to access the Internet via a 4G connection. Remember that APN information and other settings may change for each different network or device

?️ Feel free to support my endeavors through donations at:

• Ethereum: 0xc177e861fD9a9F598236C7183e105b9CCec9cb3e
• Bitcoin: bc1q3230gkphdk5qzsxtj079mz5w35svwrpwq6wh8c