Welcome to Net IP Phone!
What is provided this time is the 1.0 beta version.
This software provides source code for free, but if you need the source code, you must abide by the following rules:
1) You can use this code for research and study, but not for commercial use!
2) You are free to distribute the executable program and source code, but you must ensure its integrity and this file must be distributed together.
Instructions for use:
Power on: Turn on the listening service so that others can talk to you.
Shutdown: Turn off the listening service. Accepted connections will not be affected and you can continue the call.
Dial-up: Connect to a machine that has been powered on. After the dialog box pops up, you must enter the IP and port of the other party. If you need to use a proxy, please set up the proxy server correctly.
Hang up: disconnect the ongoing call.
After booting, the IP and port you are monitoring will be displayed. Others can connect to you through this IP and port.
After the connection is successful (you dial up to connect to someone else or someone else connects to you), the other party's IP and port will be displayed.
About proxy server:
Boot: Support Socks 4/5 proxy or use HTTP proxy at the same time. If Socks proxy is not used, HTTP proxy is invalid. After successfully booting using a proxy, the IP and port assigned by the proxy server will be displayed. Others must use this IP and port to connect to you. The boot agent is set on the main window.
Dial-up: Supports Socks 4/5 and HTTP proxy, or a combination of the two. The connection sequence when used in combination is HTTP->Socks. The dial-up proxy is set in the dialog box that pops up after clicking "Dial".
If you have questions, suggestions, or need source code, please contact me:
Email: [email protected]
QQ: 29953513
Thanks!