The starry sky forced opening of resize bar to increase the frame rate tutorial guide has stumped many players recently. Regarding this issue, the following is the most detailed strategy process, let’s take a look. There are quite a lot of tasks that need to be done in this game. There are hints for each task, and players can find them if they pay more attention.
The specific method is on the N network author page that publishes this method: https://www.nexusmods.com/starfield/mods/1696?tab=description
The downloaded software is the nvidia profile inspector in his description page, not the MOD in this page. After downloading the software, open it as an administrator, scroll down to find starfield in the upper tab, and find it in the 5th item "Common" in the lower list. rBar-Feature is set to enable, rBAR-Options is set to 0x00000001, rBAR-Size Limit is set to 0x0000000040000000, the setting items do not need to be filled in by hand, you can click the triangle drop-down list on the right to select (if there is a problem with the settings after entering the game, you can restore it after selecting NV icon, click Restore this vaule to Nvidia defaults), then click Apply Changes in the upper right corner of the software to apply the changes, and you can exit the software, and the changes will take effect permanently.
Notice! ! !
1. Some older motherboards from the NV10 series or 20 series graphics card era may not support rebar by default, or the motherboard may not be turned on. To verify whether it is turned on, please open the NV Control Panel - Help - System Information and look at " "Resizable Base Address Register" is "Yes", if yes, it is turned on, if not, it is not turned on. If it is not turned on, you can enter the bios to find out whether there are options related to above 4G and Resizable BAR, and set it to turn on, usually with PCIE In the relevant column, some older motherboards can flash the bios to enable related functions.
2. Some users who use DLSS MOD or other third-party filters will experience problems such as abnormal flickering or ghosting, and abnormal freezing after manually turning on reBAR. This can be solved by deleting the original game shader cache. The shader cache address is "C:user*yourname*AppDataLocalStarfield", the Pipeline.cache file. Delete the file and start the game and a new shader cache file will be generated. This generally solves the problem. .
3. If there are other problems such as the actual frame rate being lower after turning on, which cannot be solved by setting and deleting the shader cache, you can restore the three modified rear nv icons to the default settings by clicking on the nvidia profile inspector software and the starfield page. to restore.
4. For some older CPU users, if the CPU has been at full load or close to full load for a long time when running the game without using nvidia profile inspector, then there is no need to try this method, there will be no obvious effect, and the frame rate may even decrease. lower.
There are so many steps in the tutorial guide for forcing the resize bar to increase the frame rate in the starry sky. These are also the solutions that the editor of Sourcecode.com has practiced step by step. If you don’t understand or the steps are different, you can leave a message. After the editor sees it, Will help you solve your questions.