How to solve the puzzle of Fontaine Prison Gear in Genshin Impact 4.1? This challenge is quite difficult. I believe many players have not completed it yet. So you can take a look at the steps to solve the puzzle of Genshin Impact 4.1 Fontaine Prison Gear shared below. I hope it will be helpful to everyone.
Genshin Impact 4.1 Fontaine Prison Gear Puzzle Steps List
1. Remove the pinion gear and install it to the position of the door you want to open. After installing it, check the direction of the pinion pointer and write down this direction.
2. Remove the small gear and install it in another position. I chose the one facing the far left of the gear in the picture above. After installation, go to the console to run it. Now comes the most critical part. You need to run the big gear pointer. Until the conditions you need to open the door are met (the small pointer you wrote down points to), you must remember the direction when you go to the console to run it. The upper left is the door on the left. How do you know exactly where the big pointer should run? See the correspondence below. picture.
3. After you find the direction of the large pointer, disassemble the small gear and put it back to the position where you want to open the door. Then go to the console and run it until the big and small pointers point to each other and stop running, then you can open the door!
Correspondence diagram of large and small pointers that meet the conditions for opening the door
The picture below is needed when you proceed to step 2, because after you write down the point of the small pointer, you still need to know where you should move the big pointer to open the door you want to open. The direction in the picture below is The default orientation is to face the pinion you want to open the door.
So the picture below tells you, for example, taking the first picture as an example, when you install the small gear, the pointer points to south, then you have to move the big pointer to north, and you can open the door you want to open. , remind you again, when running the console, be sure to remember the direction of the door you want to open, and where the big pointer should point corresponding to the picture below.
