Make Abaose

Original picture

final renderings
1. Open the original image, double-click the image lock, and first perform skin polishing and whitening on the image. There are many methods of skin polishing. You can use the historical snapshot method to skin skin, or you can use other methods. I was lazy and used software to polish the skin. ( The effect after microdermabrasion is shown in the picture).

2. Click the "Create a new fill or adjustment layer" button in the layer panel (as shown by the blue arrow in Figure 1), select the curve, and adjust the brightness of the layer. The values ​​are as shown in Figure 2. (The values ​​can be adjusted according to each person's preferences. It depends on the feeling, and the values ​​are different for different pictures (the effect is as shown in the picture).

3. Continue the operation of the previous step, click the "Create a new fill or adjustment layer" button in the layer panel, select the color level, and continue to adjust the brightness of the PP. The purpose is to increase the contrast of the PP. The value is as shown in Figure 2, (the effect is as follows as shown in the figure).

4. At step 3, skin resurfacing and whitening are basically completed. Next are the specific production steps of Abao color. Merge the windable layer and press Ctrl+j to copy a layer (layer 1, as shown in Figure 1). , then click Image/Mode/Lab Color to convert the RGB mode to lab mode (as shown in Figure 2). A dialog box will appear (as shown in Figure 3), choose not to merge.

5. Click the channel in the layer panel (shown as the blue arrow in Figure 4), enter the channel panel, select all a channels (Ctrl+a), copy the a channel (ctrl+c), and paste the a channel to the b channel ( ctrl+v) to cancel the selection. (As shown in Figure 4)

6. After completing step 5, we will find that the color of the picture has come out, and we have a preliminary sample of Abao color. (Figure 1)

7. Don’t stop. Now let’s further adjust the color. Click on the A channel and use the curve (ctrl+m0) to further adjust the color (Picture 3). Move the curve down a little. You will find that the skin color becomes blue, and the value at this time should also be Adjust according to your own feeling, my values ​​are for reference only (Figure 4) (the effect is shown in Figure 2).

8. Return to the layer panel, click Image/Mode/RGB Color, and switch PP from lab mode back to RGB mode (Picture 1). If you are satisfied with the color of the layer (Picture 3), you can save it. But for those of you who are more demanding, you can further adjust it to make PP more perfect.

9. Let’s go on and further adjust the hue, color balance, and levels in the layers panel. (As shown in Figure 4, the effect after adjustment)

10. The values ​​of hue, color gradation, and color balance are as shown below (Again, there are no absolute values ​​for color adjustment. It all depends on your own feeling. The following picture is for reference only)

11. Finally, sharpen the image, click Filter/Sharpen/USM Sharpen, the values ​​are as shown below, OK, finished (final rendering)