*******************************
* 編譯錯誤訊息*
*******************************
';' not allowed before 'ELSE' ElSE前不允許有“;”
'<clause>' clause not allowed in OLE automation section 在OLE自動區段不允許「<clause>」子句
'<name>' is not a type identifier <name>不是型別標識符
'<name>' not PReviously declared as a PROPERTY <name>前面沒有說明PROPERTY
'GOTO <label>' leads into or out of TRY statement GOTO <label>進入或超出TRY語句的範圍
<clause1> clause expected, but <clause2> found 要求子句<clause1>，但出現<clause2>
16-Bit fixup encountered in object file '<text>' 在物件檔案<text>遇到16位元修復
486/487 instructions not enabled 不能用486/487指令
Abstract methods must be virtual or dynamic 抽象方法必須為虛擬的或動態的
Array type required 需要陣列類型
Assignment to FOR-Loop variable '<Name>' 給FOR迴圈變數<Name>賦值
Bad argument type in variable type array constructor 在變數類型數組結構中不正確的參數類型
Bad file format '<name>' 錯誤的檔案格式<name>
Bad file format: <Filename> 錯誤的檔案格式<Filename>
Bad global symbol definition: '<Name>' in object file '<Filename>' 物件檔案'<Filename>'中錯誤的全域符號定義'<Name>'
Bad unit format: <Filename> 錯誤的單元格式<Filename>
BREAK or CONTINUE outside of loop BREAK或CONTINUE超出循環
Cannot add or subtract relocatable symbols 不能增加或減少可重置的符號
Cannot assign to a read-only property 不能指定唯讀屬性
Cannot BREAK, CONTINUE or EXIT out of a FINALLY clause 超出FINALLY子句的範圍，不能使用BREAK,CONTINUE或EXIT語句
Cannot initialize local variables 無法初始化局部變數
Cannot initialize multiple variables 無法初始化多個變數
Cannot initialize thread local variables 不能初始化線程局部變數
Cannot override a static method 不能覆寫靜態方法
Cannot read a write-only property 不能讀取只寫屬性
Case label outside of range of case expression CASE標號超出了CASE表達式的範圍
Circular unit reference to <Unitname> 對單元<Unitname>循環引用
Class already has a default property 類別已具有預設的屬性
Class does not have a default property 類別沒有預設的屬性
Class or object types only allowed in type section 在類型區段只允許有類別或物件類型
Class type required 需要類別類型
Close error on <Filename> 檔案<Filename>關閉錯誤
Compile terminated by user 使用者中止編譯
Constant expected 要求常數
Constant expression expected 要求常數表達式
Constant expression violates subrange bounds 常數表達式超出子界範圍
Constant object cannot be passed as var parameter 常數物件不能作為變數參數傳遞
Constant or type identifier expected 要求常數或型別標識符
Constants cannot be used as open array arguments 常數不能用來作為開啟陣列參數
Constructing instance of '<name>' containing abstract methods 建構的<name>實體包含抽象的方法
Could not compile used unit '<Unitname>' 不能用單元<Unitname>編譯
Could not create output file <Filename> 不能建立輸出檔<Filename>
Could not load RLINK32.DLL 不能載入RLINK32.DLL
Data type too large: exceeds 2 GB 資料型態太大：超過2GB
Declaration of <Name> differs from previous declaration <Name>的說明與先前的說明不同
Default property must be an array property 預設的屬性必須為陣列屬性
Default values must be of ordinal, pointer or small set type 預設的值必須為序數、指標或小集類型
Destination cannot be assigned to 目標不能指定
Destination is inaccessible 目標不能存取
Dispid '<number>' already used by '<name>' DISPID識別號碼已被<name>使用
Dispid clause only allowed in OLE automation section DISPID子句只能在OLE自動區段使用
Division by zero 除數為零
Duplicate case label CASE標號重複
Duplicate tag value 重複的標誌值
Dynamic method or message handler not allowed here 這裡不允許有動態方法或資訊處理程序
Dynamic methods and message handlers not allowed in OLE automation section在OLE自動區段不允許有動態方法或訊息處理程序
Element 0 inaccessible - use 'Length' 或 'SetLength' 元素0不能存取-使用LENGTH或SETLENGTH
Error in numeric constant 數值常數錯誤
EXCEPT 或 FINALLY expected 要求EXCEPT或FINALLY
EXPORTS allowed only at global scope EXPORTS只允許在全域範圍使用
Expression has no value 表達式沒有值
Expression too complicated 表達式太複雜
Field definition not allowed in OLE automation section 在OLE自動區段中不允許網域定義
Field definition not allowed after methods or properties 在方法或屬性後不允許網域定義
Field or method identifier expected 要求域或方法標識符
File not found: <Filename> 檔案<Filename>沒有找到
File type not allowed here 這兒不允許檔案類型
For loop control variable must be simple local variable FOR循環控制變數必須為簡單局部變量
For loop control variable must have ordinal type FOR迴圈控制變數必須為序數型
FOR or WHILE loop executes zero times - deleted FOR或WHILE迴圈執行零次-刪除
FOR-Loop variable '<name>' cannot be passed as var parameter FOR循環變數<name>不能作為參數傳遞
FOR-Loop variable '<Name>' may be undefined after loop 在循環後的FOR循環變數<NAME>是不確定的
Function needs result type 函數需要結果類型
Identifier redeclared: '<name>' 標識符<name>重複說明
Illegal character in input file: '<char>' ($<hex>) 在輸入檔案中的非法字元'<char>'
Illegal message method index 非法的訊息方法指標
Illegal reference to symbol '<Name>' in object file '<Filename>' 在物件檔案<filename>中對符號<name>的非法引用
Illegal type in OLE automation section: '<typename>' 在OLE自動區段中的非法類型<typename>
Illegal type in Read/Readln statement 在Read/Readln語句中的非法類型
Illegal type in Write/Writeln statement 在Write/Writeln語句中的非法類型
Inaccessible value 不可存取的值
Incompatible types: '<name>' and '<name>' 不相容的類型<name>和<name>
Incompatible types: <text> 不相容的類型<text>
Inline assembler stack overflow 內嵌彙編溢出
Inline assembler syntax error 內嵌組合語法錯誤
Instance variable '<name>' inaccessible here 實體變數<name>在這裡不能存取
Integer constant or variable name expected 要求整形常數或變數名
Integer constant too large 整型常數太大
Internal error: <ErrorCode> 內部錯誤<errorcode>
Invalid combination of opcode and Operands 操作碼與操作對象的無效組合
Invalid compiler directive: '<Directive>' 無效的編譯指令<DIRECTIVE>
Invalid function result type 無效的函數值類型
Invalid message parameter list 無效的訊息參數列表
Invalid register combination 無效的暫存器組合
Invalid typecast 無效的TYPECASE
Label '<Name>' is not declared in current procedure 在目前的過程中沒有說明標號<NAME>
Label already defined: '<Labelname>' 標號<LABELNAME>已經定義
Label declaration not allowed in interface part 在介面部分不允許標號說明
Label declared and referenced, but not set: '<label>' 標號被<label>說明及引用,但不能設定
Label expected 要求標號
Left side cannot be assigned to 左邊不能賦值
Line too long (more than 255 characters) 行太長(超出255個字元)
Local class or object types not allowed 不允許局部的類別或物件類型
Local procedure/function '<Name>' assigned to procedure variable 局部過程/函數<NAME>賦給過程變數
LOOP/JCXZ distance out of range LOOP/JCXZ距離超出範圍
Low bound exceeds high bound 下界超過上界
Memory reference expected 要求記憶體引用
Method '<name>' hides virtual method of base type '<name>' 方法<NAME>隱藏了基底類型為<NAME>的虛擬方法
Method '<name>' not found in base class 在基底類別中找不到方法<NAME>
Method identifier expected 要求方法標識符
Missing ENDIF directive 缺少ENDIF指令
Missing operator or semicolon 缺少運算元或分號
Missing or invalid conditional symbol in '$<symbol>' directive 在$<symbol>指令中缺少或無效的條件符號
Missing parameter type 缺少參數類型
Necessary library helper function was eliminated by linker 必要的函式庫幫助函式被連接程式刪除
No definition for abstract method '<name>' allowed 抽象方法<NAME>沒有定義
Not enough actual parameters 沒有足夠的實際參數
Number of elements differs from declaration 元素數與說明不同
Numeric overflow 數值溢出
Object or class type required 需要物件或類別類型
Object type required 需要物件類型
Only register calling convention allowed in OLE automation section 在OLE自動區段只允許暫存器呼叫約定
Operand size mismatch 運算物件大小匹配
Operator not applicable to this operand type 運算子不使用於此運算物件類型
Order of fields in record constant differs from declaration 在記錄常數中的域次序與說明不同
Ordinal type required 需要序數型
Out of memory 記憶體溢出
Overflow in conversion or arithmetic operation 轉換或算術運算溢出
Overriding automated virtual method '<name>' cannot specify a dispid 所覆蓋的自動虛擬方法<NAME>無法指定DISPID
PACKED not allowed here 這裡不允許PACKED
Pointer type required 需要指標類型
Procedure cannot have a result type 過程不能有結果類型
Procedure DISPOSE needs destructor 流程DISPOSE需要destructor
Procedure FAIL only allowed in constructor 過程FAIL只允許在constructor方法中
Procedure NEW needs constructor 過程NEW需要constructor方法
PROCEDURE or FUNCTION expected 要求PROCEDURE或FUNCTION
Procedure or function name expected 要求過程或函數名
Program or unit '<name>' recursively uses itself 程式或單元遞歸
Property '<name>' does not exist in base class 在基底類別中<NAME>屬性不存在
Published property '<name>' cannot be of type <type> Published屬性<NAME>不能有型別<type>
Published Real48 property '<name>' must be Single, Double or Extended Published REAL屬性<NAME>必為Single, Double或Extended
Re-raising an exception only allowed in exception handler 在意外處理中只允許重新引起意外處理
Read error on <Filename> 檔案<FILENAME>讀出錯
Record, object or class type required 需要記錄,物件或類別類型
Redeclaration of '<name>' hides a member in the base class <NAME>的重新說明隱藏了基底類別中一個元素
Redeclaration of property not allowed in OLE automation section 在OLE自動區段中不允許屬性重複說明
Return value of function '<Functionname>' might be undefined 函數<Functionname>的回傳值可能沒有定義
Seek error on <Filename> 在<FILENAME>中搜尋錯誤
Segment/Offset pairs not supported in Borland 32-bit Pascal 在Borland 32位元的PASCAL中不支援Segment/Offset對
Sets may have at most 256 elements 集合至少有256個元素
Size of published set '<name>' is >32 bits published集<NAME>的大小大於32位元組
Slice standard function only allowed as open array argument Slice標準函數只允許作為開啟陣列參數
Statement expected, but expression of type '<type>' found 要求語句,但出現類型<TYPE>的表達式
Statements not allowed in interface part 在介面中不允許的語句
String constant too long 字串常數太長
String constant truncated to fit STRING[<number>] 字串常數截取到適合STRING[<number>]
Strings may have at most 255 elements 字串至少255個元素
Structure field identifier expected 要求結構域識別符
Syntax error in real number 實數語法錯誤
System unit out of date or corrupted: missing '<name>' 系統單元超出日期或損壞:缺少<NAME>
Text after final 'END. 編譯器忽略END.後的文本
This form of method call only allowed for class methods 此方法的窗體只允許類別方法
This form of method call only allowed in methods of derived types 此方法的窗體只允許在匯出類型的方法中
This type cannot be initialized 這類型不能初始化
Thread local variables cannot be ABSOLUTE 執行緒局部變數不能是ABSOLUTE
Thread local variables cannot be local to a function or procedure 執行緒局部變數對函數不能是局部的
Too many actual parameters 太多的實際參數
Too many conditional symbols 太多的條件符號
Type '<name>' has no type info 類型<NAME>沒有型別資訊
Type '<Name>' is not yet completely defined 類型<NAME>至今沒有定義
Type '<name>' must be a class to have a PUBLISHED section 類型<NAME>必須是PUBLISHED區段中的類
Type '<name>' must be a class to have OLE automation 類型<NAME>必須是具有OLE自動的類
Type '<name>' needs finalization - not allowed in file type 類型<NAME>需要初始化-不允許在檔案類型中
Type '<name>' needs finalization - not allowed in variant record 類型<NAME>需要初始化-不允許在變體記錄
Type expected 要求TYPE
Type not allowed in OLE Automation call 在OLE自動呼叫中不允許的類型
Type of expression must be BOOLEAN 表達式的型別必須為BOOLEAN型
Type of expression must be INTEGER 表達式的型別必須為INTEGER型
TYPEINFO standard function expects a type identifier TYPEINFO標準函數要求類型標識符
TYPEOF can only be applied to object types with a VMT TYPEOF只能用於具有VMT的物件類型
Types of actual and formal var parameters must be identical 形參與實參必須一致
Undeclared identifier: '<name>' 未說明的識別碼<NAME>
Unexpected end of file in comment started on line <Number> 以行<Number>開始的註解中出現不該有的檔案結束
Unit <Unit1> was compiled with a different version of <Unit2> 單元<UNIT1>與不同版本的<UNIT2>編譯
Unit name mismatch: '<Unitname>' 單元名稱不符<UNITNAME>
Unknown directive: '<Directive>' 未知的指令<DIRECTIVE>
Unnamed arguments must precede named arguments in OLE Automation call 在OLE自動呼叫中未命名的參數必須在命名的參數前
Unsatisfied forward or external declaration: '<Procedurename>' 不滿足的向前或外部說明<Procedurename>
Unterminated string 未結束的字串
Value assigned to '<Name>' never used 賦給<NAME>的值從未使用過
Variable '<name>' inaccessible here due to optimization 由於最佳化,變數名稱<NAME>在這裡無法存取
Variable '<name>' is declared but never used in '<name>' 變數名稱<NAME>已說明,但不曾使用
Variable '<Name>' might not have been initialized 變數名稱<NAME>可能沒有初始化
Variable required 需要變數
Virtual constructors are not allowed 不允許虛擬的constructors方法
Write error on <Filename> 檔案<Filename>寫錯誤
Wrong 或 corrupted version of RLINK32.DLL RLINK32.DLL版本錯誤或不能用
************************************************** *********************************************