bsc
v1.4.15
The goal of BNB Smart Chain is to bring programmability and interoperability to BNB Beacon Chain. In order to embrace the existing popular community and advanced technology, it will bring huge benefits by staying compatible with all the existing smart contracts on Ethereum and Ethereum tooling. And to achieve that, the easiest solution is to develop based on go-ethereum fork, as we respect the great work of Ethereum very much.
BNB Smart Chain starts its development based on go-ethereum fork. So you may see many toolings, binaries and also docs are based on Ethereum ones, such as the name “geth”.
But from that baseline of EVM compatible, BNB Smart Chain introduces a system of 21 validators with Proof of Staked Authority (PoSA) consensus that can support short block time and lower fees. The most bonded validator candidates of staking will become validators and produce blocks. The double-sign detection and other slashing logic guarantee security, stability, and chain finality.
The BNB Smart Chain will be:
More details in White Paper.
Although Proof-of-Work (PoW) has been approved as a practical mechanism to implement a decentralized network, it is not friendly to the environment and also requires a large size of participants to maintain the security.
Proof-of-Authority(PoA) provides some defense to 51% attack, with improved efficiency and tolerance to certain levels of Byzantine players (malicious or hacked). Meanwhile, the PoA protocol is most criticized for being not as decentralized as PoW, as the validators, i.e. the nodes that take turns to produce blocks, have all the authorities and are prone to corruption and security attacks.
Other blockchains, such as EOS and Cosmos both, introduce different types of Deputy Proof of Stake (DPoS) to allow the token holders to vote and elect the validator set. It increases the decentralization and favors community governance.
To combine DPoS and PoA for consensus, BNB Smart Chain implement a novel consensus engine called Parlia that:
BNB will run on BNB Smart Chain in the same way as ETH runs on Ethereum so that it remains as native token for BSC. This means,
BNB will be used to:
gas to deploy or invoke Smart Contract on BSCMany of the below are the same as or similar to go-ethereum.
For prerequisites and detailed build instructions please read the Installation Instructions.
Building geth requires both a Go (version 1.21 or later) and a C compiler (GCC 5 or higher). You can install
them using your favourite package manager. Once the dependencies are installed, run
make gethor, to build the full suite of utilities:
make allIf you get such error when running the node with self built binary:
Caught SIGILL in blst_cgo_init, consult <blst>/bindinds/go/README.md.please try to add the following environment variables and build again:
export CGO_CFLAGS="-O -D__BLST_PORTABLE__"
export CGO_CFLAGS_ALLOW="-O -D__BLST_PORTABLE__"The bsc project comes with several wrappers/executables found in the cmd
directory.
| Command | Description |
|---|---|
geth |
Main BNB Smart Chain client binary. It is the entry point into the BSC network (main-, test- or private net), capable of running as a full node (default), archive node (retaining all historical state) or a light node (retrieving data live). It has the same and more RPC and other interface as go-ethereum and can be used by other processes as a gateway into the BSC network via JSON RPC endpoints exposed on top of HTTP, WebSocket and/or IPC transports. geth --help and the CLI page for command line options. |
clef |
Stand-alone signing tool, which can be used as a backend signer for geth. |
devp2p |
Utilities to interact with nodes on the networking layer, without running a full blockchain. |
abigen |
Source code generator to convert Ethereum contract definitions into easy to use, compile-time type-safe Go packages. It operates on plain Ethereum contract ABIs with expanded functionality if the contract bytecode is also available. However, it also accepts Solidity source files, making development much more streamlined. Please see our Native DApps page for details. |
bootnode |
Stripped down version of our Ethereum client implementation that only takes part in the network node discovery protocol, but does not run any of the higher level application protocols. It can be used as a lightweight bootstrap node to aid in finding peers in private networks. |
evm |
Developer utility version of the EVM (Ethereum Virtual Machine) that is capable of running bytecode snippets within a configurable environment and execution mode. Its purpose is to allow isolated, fine-grained debugging of EVM opcodes (e.g. evm --code 60ff60ff --debug run). |
rlpdump |
Developer utility tool to convert binary RLP (Recursive Length Prefix) dumps (data encoding used by the Ethereum protocol both network as well as consensus wise) to user-friendlier hierarchical representation (e.g. rlpdump --hex CE0183FFFFFFC4C304050583616263). |
gethGoing through all the possible command line flags is out of scope here (please consult our
CLI Wiki page),
but we've enumerated a few common parameter combos to get you up to speed quickly
on how you can run your own geth instance.
The hardware must meet certain requirements to run a full node on mainnet:
The requirement for testnet:
# Linux
wget $(curl -s https://api.github.com/repos/bnb-chain/bsc/releases/latest |grep browser_ |grep geth_linux |cut -d" -f4)
mv geth_linux geth
chmod -v u+x geth
# MacOS
wget $(curl -s https://api.github.com/repos/bnb-chain/bsc/releases/latest |grep browser_ |grep geth_mac |cut -d" -f4)
mv geth_macos geth
chmod -v u+x geth//== mainnet
wget $(curl -s https://api.github.com/repos/bnb-chain/bsc/releases/latest |grep browser_ |grep mainnet |cut -d" -f4)
unzip mainnet.zip
//== testnet
wget $(curl -s https://api.github.com/repos/bnb-chain/bsc/releases/latest |grep browser_ |grep testnet |cut -d" -f4)
unzip testnet.zipDownload latest chaindata snapshot from here. Follow the guide to structure your files.
./geth --config ./config.toml --datadir ./node --cache 8000 --rpc.allow-unprotected-txs --history.transactions 0
## It is recommend to run fullnode with `--tries-verify-mode none` if you want high performance and care little about state consistency
## It will run with Hash-Base Storage Scheme by default
./geth --config ./config.toml --datadir ./node --cache 8000 --rpc.allow-unprotected-txs --history.transactions 0 --tries-verify-mode none
## It runs fullnode with Path-Base Storage Scheme.
## It will enable inline state prune, keeping the latest 90000 blocks' history state by default.
./geth --config ./config.toml --datadir ./node --cache 8000 --rpc.allow-unprotected-txs --history.transactions 0 --tries-verify-mode none --state.scheme pathMonitor the log from ./node/bsc.log by default. When the node has started syncing, should be able to see the following output:
t=2022-09-08T13:00:27+0000 lvl=info msg="Imported new chain segment" blocks=1 txs=177 mgas=17.317 elapsed=31.131ms mgasps=556.259 number=21,153,429 hash=0x42e6b54ba7106387f0650defc62c9ace3160b427702dab7bd1c5abb83a32d8db dirty="0.00 B"
t=2022-09-08T13:00:29+0000 lvl=info msg="Imported new chain segment" blocks=1 txs=251 mgas=39.638 elapsed=68.827ms mgasps=575.900 number=21,153,430 hash=0xa3397b273b31b013e43487689782f20c03f47525b4cd4107c1715af45a88796e dirty="0.00 B"
t=2022-09-08T13:00:33+0000 lvl=info msg="Imported new chain segment" blocks=1 txs=197 mgas=19.364 elapsed=34.663ms mgasps=558.632 number=21,153,431 hash=0x0c7872b698f28cb5c36a8a3e1e315b1d31bda6109b15467a9735a12380e2ad14 dirty="0.00 B"Start up geth's built-in interactive JavaScript console,
(via the trailing console subcommand) through which you can interact using web3 methods
(note: the web3 version bundled within geth is very old, and not up to date with official docs),
as well as geth's own management APIs.
This tool is optional and if you leave it out you can always attach to an already running
geth instance with geth attach.
More details about running a node and becoming a validator
Note: Although some internal protective measures prevent transactions from
crossing over between the main network and test network, you should always
use separate accounts for play and real money. Unless you manually move
accounts, geth will by default correctly separate the two networks and will not make any
accounts available between them.
As an alternative to passing the numerous flags to the geth binary, you can also pass a
configuration file via:
$ geth --config /path/to/your_config.tomlTo get an idea of how the file should look like you can use the dumpconfig subcommand to
export your existing configuration:
$ geth --your-favourite-flags dumpconfiggeth nodesAs a developer, sooner rather than later you'll want to start interacting with geth and the
BSC network via your own programs and not manually through the console. To aid
this, geth has built-in support for a JSON-RPC based APIs (standard APIs
and geth specific APIs).
These can be exposed via HTTP, WebSockets and IPC (UNIX sockets on UNIX based
platforms, and named pipes on Windows).
The IPC interface is enabled by default and exposes all the APIs supported by geth,
whereas the HTTP and WS interfaces need to manually be enabled and only expose a
subset of APIs due to security reasons. These can be turned on/off and configured as
you'd expect.
HTTP based JSON-RPC API options:
--http Enable the HTTP-RPC server--http.addr HTTP-RPC server listening interface (default: localhost)--http.port HTTP-RPC server listening port (default: 8545)--http.api API's offered over the HTTP-RPC interface (default: eth,net,web3)--http.corsdomain Comma separated list of domains from which to accept cross origin requests (browser enforced)--ws Enable the WS-RPC server--ws.addr WS-RPC server listening interface (default: localhost)--ws.port WS-RPC server listening port (default: 8546)--ws.api API's offered over the WS-RPC interface (default: eth,net,web3)--ws.origins Origins from which to accept WebSocket requests--ipcdisable Disable the IPC-RPC server--ipcapi API's offered over the IPC-RPC interface (default: admin,debug,eth,miner,net,personal,txpool,web3)--ipcpath Filename for IPC socket/pipe within the datadir (explicit paths escape it)You'll need to use your own programming environments' capabilities (libraries, tools, etc) to
connect via HTTP, WS or IPC to a geth node configured with the above flags and you'll
need to speak JSON-RPC on all transports. You
can reuse the same connection for multiple requests!
Note: Please understand the security implications of opening up an HTTP/WS based transport before doing so! Hackers on the internet are actively trying to subvert BSC nodes with exposed APIs! Further, all browser tabs can access locally running web servers, so malicious web pages could try to subvert locally available APIs!
Bootnodes are super-lightweight nodes that are not behind a NAT and are running just discovery protocol. When you start up a node it should log your enode, which is a public identifier that others can use to connect to your node.
First the bootnode requires a key, which can be created with the following command, which will save a key to boot.key:
bootnode -genkey boot.key
This key can then be used to generate a bootnode as follows:
bootnode -nodekey boot.key -addr :30311 -network bsc
The choice of port passed to -addr is arbitrary. The bootnode command returns the following logs to the terminal, confirming that it is running:
enode://3063d1c9e1b824cfbb7c7b6abafa34faec6bb4e7e06941d218d760acdd7963b274278c5c3e63914bd6d1b58504c59ec5522c56f883baceb8538674b92da48a96@127.0.0.1:0?discport=30311
Note: you're using cmd/bootnode, a developer tool.
We recommend using a regular node as bootstrap node for production deployments.
INFO [08-21|11:11:30.687] New local node record seq=1,692,616,290,684 id=2c9af1742f8f85ce ip= udp=0 tcp=0
INFO [08-21|12:11:30.753] New local node record seq=1,692,616,290,685 id=2c9af1742f8f85ce ip=54.217.128.118 udp=30311 tcp=0
INFO [09-01|02:46:26.234] New local node record seq=1,692,616,290,686 id=2c9af1742f8f85ce ip=34.250.32.100 udp=30311 tcp=0
Thank you for considering helping out with the source code! We welcome contributions from anyone on the internet, and are grateful for even the smallest of fixes!
If you'd like to contribute to bsc, please fork, fix, commit and send a pull request for the maintainers to review and merge into the main code base. If you wish to submit more complex changes though, please check up with the core devs first on our discord channel to ensure those changes are in line with the general philosophy of the project and/or get some early feedback which can make both your efforts much lighter as well as our review and merge procedures quick and simple.
Please make sure your contributions adhere to our coding guidelines:
master branch.Please see the Developers' Guide for more details on configuring your environment, managing project dependencies, and testing procedures.
The bsc library (i.e. all code outside of the cmd directory) is licensed under the
GNU Lesser General Public License v3.0,
also included in our repository in the COPYING.LESSER file.
The bsc binaries (i.e. all code inside of the cmd directory) is licensed under the
GNU General Public License v3.0, also
included in our repository in the COPYING file.
