aws lambda cpp Download - aws lambda cpp Source code download

aws lambda cpp

C/C++

v0.2.10

Download

OS	Arch	Status
Amazon Linux 2	x86_64
Amazon Linux 2	aarch64
Amazon Linux (ALAMI)	x86_64
Alpine	x86_64
Arch Linux	x86_64
Ubuntu 18.04	x86_64

AWS Lambda C++ Runtime

C++ implementation of the lambda runtime API

Design Goals

Negligible cold-start overhead (single digit millisecond).
Freedom of choice in compilers, build platforms and C standard library versions.

Building and Installing the Runtime

Since AWS Lambda runs on GNU/Linux, you should build this runtime library and your logic on GNU/Linux as well.

Prerequisites

Make sure you have the following packages installed first:

CMake (version 3.9 or later)
git
Make or Ninja
zip
libcurl-devel (on Debian-based distros it's libcurl4-openssl-dev)

In a terminal, run the following commands:

$ git clone https://github.com/awslabs/aws-lambda-cpp.git
$ cd aws-lambda-cpp
$ mkdir build
$ cd build
$ cmake .. -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=~/lambda-install
$ make && make install

To consume this library in a project that is also using CMake, you would do:

cmake_minimum_required(VERSION 3.9)
set(CMAKE_CXX_STANDARD 11)
project(demo LANGUAGES CXX)
find_package(aws-lambda-runtime)
add_executable(${PROJECT_NAME} "main.cpp")
target_link_libraries(${PROJECT_NAME} PRIVATE AWS::aws-lambda-runtime)
target_compile_features(${PROJECT_NAME} PRIVATE "cxx_std_11")
target_compile_options(${PROJECT_NAME} PRIVATE "-Wall" "-Wextra")

# this line creates a target that packages your binary and zips it up
aws_lambda_package_target(${PROJECT_NAME})

And here is how a sample main.cpp would look like:

#include <aws/lambda-runtime/runtime.h>

using namespace aws::lambda_runtime;

static invocation_response my_handler(invocation_request const& req)
{
    if (req.payload.length() > 42) {
        return invocation_response::failure("error message here"/*error_message*/,
                                            "error type here" /*error_type*/);
    }

    return invocation_response::success("json payload here" /*payload*/,
                                        "application/json" /*MIME type*/);
}

int main()
{
    run_handler(my_handler);
    return 0;
}

And finally, here's how you would package it all. Run the following commands from your application's root directory:

$ mkdir build
$ cd build
$ cmake .. -DCMAKE_BUILD_TYPE=Debug -DCMAKE_INSTALL_PREFIX=~/lambda-install
$ make
$ make aws-lambda-package-demo

The last command above make aws-lambda-package-demo will create a zip file called demo.zip in the current directory.

Now, create an IAM role and the Lambda function via the AWS CLI.

First create the following trust policy JSON file

$ cat trust-policy.json
{
 "Version": "2012-10-17",
  "Statement": [
    {
      "Effect": "Allow",
      "Principal": {
        "Service": ["lambda.amazonaws.com"]
      },
      "Action": "sts:AssumeRole"
    }
  ]
}

Then create the IAM role:

$ aws iam create-role --role-name lambda-demo --assume-role-policy-document file://trust-policy.json

Note down the role Arn returned to you after running that command. We'll need it in the next steps:

Attach the following policy to allow Lambda to write logs in CloudWatch:

$ aws iam attach-role-policy --role-name lambda-demo --policy-arn arn:aws:iam::aws:policy/service-role/AWSLambdaBasicExecutionRole

Make sure you attach the appropriate policies and/or permissions for any other AWS services that you plan on using.

And finally, create the Lambda function:

$ aws lambda create-function --function-name demo 
--role  
--runtime provided --timeout 15 --memory-size 128 
--handler demo --zip-file fileb://demo.zip

And to invoke the function:

$ aws lambda invoke --function-name demo --payload '{"answer":42}' output.txt

Using the C++ SDK for AWS with this runtime

This library is completely independent from the AWS C++ SDK. You should treat the AWS C++ SDK as just another dependency in your application. See the examples section for a demo utilizing the AWS C++ SDK with this Lambda runtime.

Supported Compilers

Any fully compliant C++11 compiler targeting GNU/Linux x86-64 should work. Please avoid compiler versions that provide half-baked C++11 support.

Use GCC v5.x or above
Use Clang v3.3 or above

Packaging, ABI, GNU C Library, Oh My!

Lambda runs your code on some version of Amazon Linux. It would be a less than ideal customer experience if you are forced to build your application on that platform and that platform only.

However, the freedom to build on any linux distro brings a challenge. The GNU C Library ABI. There is no guarantee the platform used to build the Lambda function has the same GLIBC version as the one used by AWS Lambda. In fact, you might not even be using GNU's implementation. For example you could build a C++ Lambda function using musl libc.

To ensure that your application will run correctly on Lambda, we must package the entire C runtime library with your function. If you choose to build on the same Amazon Linux version used by lambda, you can avoid packaging the C runtime in your zip file. This can be done by passing the NO_LIBC flag in CMake as follows:

aws_lambda_package_target(${PROJECT_NAME} NO_LIBC)

Common Pitfalls with Packaging

Any library dependency your Lambda function has that is dynamically loaded via dlopen will NOT be automatically packaged. You must add those dependencies manually to the zip file. This applies to any configuration or resource files that your code depends on.
If you are making HTTP calls over TLS (https), keep in mind that the CA bundle location is different between distros. For example, if you are using the AWS C++ SDK, it's best to set the following configuration options:

Aws::Client::ClientConfiguration config;
config.caFile = "/etc/pki/tls/certs/ca-bundle.crt";

If you are not using the AWS C++ SDK, but happen to be using libcurl directly, you can set the CA bundle location by doing:

curl_easy_setopt(curl_handle, CURLOPT_CAINFO, "/etc/pki/tls/certs/ca-bundle.crt");

FAQ & Troubleshooting

Why is the zip file so large? what are all those files? Typically, the zip file is large because we have to package the entire C standard library. You can reduce the size by doing some or all of the following:
- Ensure you're building in release mode -DCMAKE_BUILD_TYPE=Release
- If possible, build your function using musl libc, it's tiny. The easiest way to do this, assuming your code is portable, is to build on Alpine linux, which uses musl libc by default.

How to upload a zip file that's bigger than 50MB via the CLI? Upload your zip file to S3 first:

$ aws s3 cp demo.zip s3://mys3bucket/demo.zip

NOTE: you must use the same region for your S3 bucket as the lambda.

Then you can create the Lambda function this way:

$ aws lambda create-function --function-name demo 
--role <specify role arn here> 
--runtime provided --timeout 15 --memory-size 128 
--handler demo
--code "S3Bucket=mys3bucket,S3Key=demo.zip"

My code is crashing, how can I debug it?
- Starting with v0.2.0 you should see a stack-trace of the crash site in the logs (which are typically stored in CloudWatch).
  - To get a more detailed stack-trace with source-code information such as line numbers, file names, etc. you need to install one of the following packages:
    - On Debian-based systems - sudo apt install libdw-dev or sudo apt install binutils-dev
    - On RHEL based systems - sudo yum install elfutils-devel or sudo yum install binutils-devel If you have either of those packages installed, CMake will detect them and automatically link to them. No other steps are required.
- Turn up the logging verbosity to the maximum.
  - Build the runtime in Debug mode. -DCMAKE_BUILD_TYPE=Debug. Verbose logs are enabled by default in Debug builds.
  - To enable verbose logs in Release builds, build the runtime with the following CMake flag -DLOG_VERBOSITY=3
  - If you are using the AWS C++ SDK, see this FAQ on how to adjust its logging verbosity
- Run your code locally on an Amazon Linux AMI or Docker container to reproduce the problem
  - If you go the AMI route, use the official one recommended by AWS Lambda
  - If you go the Docker route, use the following command to launch a container running AL2017.03 $ docker run -v /tmp:/tmp -it --security-opt seccomp=unconfined amazonlinux:2017.03 The security-opt argument is necessary to run gdb, strace, etc.
CURL problem with the SSL CA cert
- Make sure you are using a libcurl version built with OpenSSL, or one of its flavors (BoringSSL, LibreSSL)
- Make sure you tell libcurl where to find the CA bundle file.
- You can try hitting the non-TLS version of the endpoint if available. (Not Recommended).
No known conversion between std::string and Aws::String
- Either turn off custom memory management in the AWS C++ SDK or build it as a static library (-DBUILD_SHARED_LIBS=OFF)