Use channel selection to cut out flame material

Author：Eve Cole Update Time：2013-01-06 16:00:48

Source: Internet Author: Mengyoucanghai The cutout method of this tutorial is very unique. When cutting out, you only need to call out the selection of each channel, then create different layers, fill them with different colors, and then change the blending mode of the layer. That’s it.
Original picture

final effect

1. Open the original image material, enter the channel panel, and copy each channel one layer at a time.

2. Hold down the Ctrl key, right-click the red channel copy to load the selection.

3. Return to the layer panel, create a new layer and name it "red", fill the selection with the following colors: R:255, G:0, B:0.

4. Then the remaining two are the same as loading the red light selection. The fill color of the "green" layer is: R:0, G:255, B:0; the fill color of the "blue" layer is: R:0, G: 0,B:255.

5. On the layer "Blue", change the blending mode to "Screen". The effect is as shown below.

6. Change the blending mode of the "Green" layer to "Screen".

7. Change the blending mode of the "Red" layer to "Normal", and then press Ctrl + E to merge these layers.

Finally, add your favorite background to complete the final effect.