This Mini World is very popular, and many players are playing it. So how to solve the "Mini World" stone brushing machine production method 2023 guide? Users who encounter this problem are very headache. The following editor can give users Let’s talk about the solution to this problem.
1. First, use hard sand blocks to build a shape as shown below on the flat ground with 3 left and 3 right blocks, leaving a gap in the middle.
2. Place a power amplifier at one end. The power amplifier only lights up 1 grid, followed by 5 power lines.
3. Dig a hole behind the fifth power line, place a power generator on the wall of the pit, connect another power line to the pit to make a pulse circuit, and add a switch at the end to control the working status of the circuit.
4. Then put a push-pull arm in front of the power amplifier. After the push-pull arm is pushed out, it just blocks the gap on the side.
5. Put a bucket of water in the gap on the side.
6. Then cover the water with a square, make a hollow cross, and place a bucket of magma in the middle. The magma is just above the second space where the mechanical arm is pushed.
How it works:
When the robotic arm is pushed out, the magma is prevented from flowing downward. When the robotic arm is retracted, the magma flows downward and reacts with the water flowing out from the left to generate rock blocks. The robotic arm pushed outward again to push the rock block out, and then the action was repeated.
Such a simple stone brushing machine is ready. Once the brush reaches a certain length, the rock blocks can be dug out directly.
