pac194x下載 - pac194x原始碼下載

pac194x

PowerBuilder

1.0.0

下載

Rust pac194x電源監視器驅動程式

用於使用嵌入式 hal 特性的 Microchip pac194x單/多通道功率監視器的與平台無關的驅動程式套件。

該驅動程式允許您：

將每個可用暫存器讀/寫為 Rust 資料結構，讓您設定警報、求平均值等。
直接讀取總線並偵測電壓為f32 s

用法

要使用此驅動程序，請匯入此套件和embedded_hal實現，然後實例化適當的裝置。

pac194x , AddrSelect}; const SENSE_RESISTOR: f32 = 0.5; fn main() { let i2c = I2cdev::new("/dev/i2c-1").unwrap(); let mut sensor = pac194x ::new(i2c, AddrSelect::GND).unwrap(); loop { let bus_voltage_1 = sensor.read_bus_voltage_n(1).unwrap(); let sense_voltage_1 = sensor.read_sense_voltage_n(1).unwrap(); println!("Channel 1 has a bus voltage of: {:.2} V", bus_voltage_1); println!("Channel 1 is pulling a current of: {:.2} A", sense_voltage_1 / SENSE_RESISTOR); } }">

 use linux_embedded_hal :: I2cdev ;
use pac194x :: { pac194x , AddrSelect } ;

const SENSE_RESISTOR : f32 = 0.5 ;

fn main ( ) {
    let i2c = I2cdev :: new ( "/dev/i2c-1" ) . unwrap ( ) ;
    let mut sensor = pac194x :: new ( i2c , AddrSelect :: GND ) . unwrap ( ) ;
    loop {
        let bus_voltage_1 = sensor . read_bus_voltage_n ( 1 ) . unwrap ( ) ;
        let sense_voltage_1 = sensor . read_sense_voltage_n ( 1 ) . unwrap ( ) ;
        println ! ( "Channel 1 has a bus voltage of: {:.2} V" , bus_voltage_1 ) ;
        println ! ( "Channel 1 is pulling a current of: {:.2} A" , sense_voltage_1 / SENSE_RESISTOR ) ;
    }
}