FlicFlac
1.10
微型便攜式音頻轉換器（WAV FLAC MP3 OGG猿）
下載二進製文件：http：//sector-seven.com/software/flicflac
這是將WAV，FLAC，MP3，APE，OGG，M4A和AAC文件轉換為其他任何格式的簡單實用程序（除了僅支持輸入格式的M4A和AAC之外）。
它使用這些外部命令行編碼器/解碼器（包含在軟件包中）：
flac.exe（FLAC轉換器）-flac -win.zip
lame.exe（mp3轉換器） - la腳釋放捆綁包
oggenc.exe和oggdec.exe（ogg轉換器）
mac.exe（猿轉換器）
faad.exe（M4A和AAC轉換器）
如果您重新分配此軟件包，請參考這些編碼器的許可。
在第一次運行中，Flicflac將創建一個小的INI文件，以便您在需要時進行一些次要配置，還將將五個所需的轉換器保存到Windows Temp Directory（Flac.exe，Lame.exe ，Oggenc.exe，Oggenc.exe，Oggdec）中。 exe和faad.exe）。
通過按下格式按鈕之一選擇轉換格式。
按選擇按鈕選擇要轉換的文件。
通過按下格式按鈕之一選擇轉換格式。
將文件或文件夾拖到選擇按鈕。
將文件或文件夾拖到格式按鈕之一。
右鍵單擊文件，然後選擇使用Flicflac的轉換。
這僅在單個文件上起作用。
通過“設置”菜單啟用/禁用上下文菜單集成。
默認情況下，使用此方法時，Flicflac將在轉換後退出。這可以在INI文件中更改。
您可以通過按F8或右鍵單擊鍵（應用程序）或右鍵單擊GUI上的任何地方來激活通過鍵盤的設置菜單。
FLAC文件用默認的FLAC設置（中等壓縮，中速）編碼
MP3文件的默認為192kbps。編碼模式（CBR/VBR）和比特率可通過INI文件配置。
預設在輕鬆訪問菜單中提供。
可以在INI文件中配置預設菜單。
OGG文件的質量設置為5（以0-10的比例）編碼
APE文件的壓縮水平為2000（比例為1000-2000）
OGG和MP3文件編碼ID3標籤信息：
歌曲標題=文件名
年=本年
藝術家=取自INI文件
本地轉換（一個步驟）：
wav2mp3 wav至mp3（la腳）
mp32wav mp3到wav（la腳）
flac2wav flac to wav（flac）
WAV2FLAC WAV到FLAC（FLAC）
wav2ogg wav到ogg（oggenc）
Flac2ogg Wav到Flac（Oggenc）
ogg2wav ogg to wav（oggdec）
wav2ape wav到猿（MAC）
ape2wav猿到wav（MAC）
M4A2WAV M4A到WAV（FAAD）
AAC2WAV AAC到WAV（FAAD）
混合轉換（兩個步驟）：
flac2mp3 flac to wav（flac），然後wav到mp3（la腳）
flac2ape flac to wav（flac），然後wav到猿（MAC）
mp32flac mp3到wav（la腳），然後wav到flac（flac）
mp32ogg mp3到wav（la腳），然後wav到ogg（oggenc）
mp32ape mp3到wav（la腳），然後wav到猿（Mac）
OGG2FLAC OGG到WAV（OGGDEC），然後wav到FLAC（FLAC）
ogg2mp3 ogg to wav（oggdec），然後wav到mp3（la腳）
ogg2ape ogg to wav（oggdec），然後wav到ape（mac）
ape2mp3猿到wav（Mac），然後wav至mp3（la腳）
ape2ogg猿到WAV（Mac），然後wav到OGG（Oggenc）
ape2flac猿到WAV（MAC），然後wav到FLAC（FLAC）
M4A2FLAC M4A到WAV（FAAD），然後wav到FLAC（FLAC）
M4A2MP3 M4A到WAV（FAAD），然後wav至mp3（la腳）
M4A2OGG M4A到WAV（FAAD），然後wav到Ogg（Oggenc）
M4A2APE M4A到WAV（FAAD），然後向APE（MAC）wav
AAC2FLAC AAC到WAV（FAAD），然後wav到FLAC（FLAC）（FLAC）
AAC2MP3 AAC到WAV（FAAD），然後wav至mp3（la腳）
AAC2OGG AAC到WAV（FAAD），然後wav到Ogg（Oggenc）
AAC2APE AAC到WAV（FAAD），然後Wav到APE（MAC）
mp3比特率轉換
也支持mp3至mp3-轉換為其他比特率。
該代碼根據麻省理工學院許可發布。請注意，Flicflac使用外部編解碼器來編碼音頻文件，請參閱其各自的許可證。
Jastria Rahmat（Ijash） - 圖標
2022 10 28 - 1.11 Updated: MP3 encoder (lame.exe) to version 3.100.1 2020 04 17 - 1.10 Added : Support for AAC and M4A (input only) using faad Fixed : Run as Administrator when enabling/disabling shell integration Changed: Links in About dialog 2016 02 27 - 1.03 Changed: Icon, courtesy of Jastria Rahmat (ijash) Changed: License to MIT Updated: Some minor code tweaks to support newer AutoHotkey version Updated: UI to allow use of Windows theme and act as a tool window 2013 08 16 - 1.02 Changed: MP3 to MP3 conversion will no longer offer to delete the input file 2011 03 09 - 1.01 Added : Support for MP3 to MP3 conversion (bitrate change). Changed: About dialog. 2011 01 07 - 1.00 Added : Support for Monkey's Audio APE format 2010 12 14 - 0.36 Fixed : Shell integration did not work in some cases. Updated: Shell integration now sensitive to UAC. Changed: Minor GUI changes to better fit Windows 7 Changed: Default ID3 artist in INI file is now empty Updated: Lame MP3 version to 3.98.4 2009 10 06 - 0.32 Updated: Lame version to 3.98.2. 2009 06 22 - 0.31 Changed: Recompiled with AutoHotkey 1.0.48.02 due to AVG reporting false positive with older AHK version. 2009 06 09 - 0.30 Added : Configuration in INI to enable/disable flat buttons. (thanks Dr. Drips). 2008 12 11 - 0.29 Fixed : Context menu integration was installed on startup even without user request. Also caused the "Disable Shell Integration" option to be temporary, until the next time you use FlicFlac. Removed: "Open folder when done" checkbox. Now resides in the INI file only. Added : "Always on top" checkbox. Added : Option in INI to choose if you want the window to start inactive or not, when Always on Top is enabled. 2008 12 09 - 0.28 Added : Context menu integration. May be enabled or disabled from the settings menu. Currently supports only single files. No support for multi-files selection or folders. When a conversion is done through the context menu, FlicFlac will exit when its done (may be changed in the INI file). 2008 12 03 - 0.27 Fixed : Ogg encoders were not cleaned on exit. Fixed : Ogg encoders were not tested for existence. Added : DebugMode - if enabled, will log actions to file and (optionally) avoid execution of conversions and deletions. Changed: Executables will no longer be oeverwritten in the temp folder. Improves loading time (was broken in 0.26). Added : Temp folder location is now configurable. Added : CleanupOnExit is now configurable (allows to delete the encoders on exit). Added : All encoder options are now configurable. 2008 12 03 - 0.26 Added : Support for OGG files using OggTools 1.0.1 Changed: Buttons to flat 2008 08 31 - 0.25 Changed: Minor maintenance release - removed tray icon. 2008 06 03 - 0.24 Fixed : GUI did not look right in some XP theme settings (thanks patto). 2008 06 01 - 0.23 Added : Custom dialog boxes for delete confirmation and overwrite confirmation. We will now have "Yes to All" and "No to All" dialogs. Added : The files that were not converted due to a "No" answer to an overwrite confirmation request, will be displayed in a message box at the end of the conversion cycle. Changed: Default value for ConfirmBeforeDelete key in INI now includes all three formats, for consistency (since we now have the yes/no to all dialog). 2008 05 31 - 0.22 Added : We will now remember the last selected format (thanks Tom de Rooy). 2008 05 30 - 0.21 Added : Configuration in INI file to confirm before deleting or overwriting certain file types. By default, we will ask before we delete or overwrite FLAC and WAV. Added : A menu for some common operations. Added : Menu item: Open INI. Will start the INI with your default INI editor and wait for you to close it. Then, if it was changed, we will reload ourselves. Added : Sub menu: MP3 encoding presets. The menu elements are completely customizable in the INI file and the last used preset is stored in the INI. Selecting "Custom" will use the settings you have configured in the INI keys (MP3->Mode, CBRKbps, VBRLevel, VBRRate). Changed: When using one of the double conversions (e.g. FLAC2MP3) we will now use a temporary filename for the temporary output instead of using the same filename (to avoid accidental overwrite). 2008 05 29 - 0.20 Added : Support for FLAC2MP3 conversion (thanks teknocide & Weird Energy). This will first do FLAC2WAV then WAV2MP3 since we are using two separate encoders. Added : Support for MP32WAV and MP32FLAC Added : Error message dialog, in case the encoder returns an error code. This is done for two reasons: a) to capture bad behavior done by the external encoders (e.g. attempting to convert ding.wav at 192kbps fails by LAME, but for some reason it still generates an empty MP3 file) and b) to make sure that if we are asked to delete the input file, we got a good exit code from the encoder. Added : Some configuration in the INI file to control how we handle errors. Added : Verification code to make sure we have an up to date INI file. In case an INI file from an older version is found, an option to automatically update it is provided. Changed: The way we delete source files. Instead of letting the encoder delete the source with a command line switch, we will delete it ourselves if the encoder returned a success exit code. This was changed in order to be more generic (for encoders that do not support deletion of input file). Changed: Significant changes to internal conversion functions and to the GUI Changed: !!! IMPORTANT !!! Delete Input File checkbox is now working the same in all file formats (i.e. we will also delete FLAC and WAV files when it is checked). 2008 05 28 - 0.14 Added : Support for VBR encoding for MP3 (thanks Tom de Rooy). 2008 05 28 - 0.13 Fixed : Dragging over non-button control was still attempting to convert. No damage was done, since we did not know which conversion to do, but the regex code was inaccurate. Added : Check for correct windows coordinates on startup (was done only on shutdown by mistake). Added : The state of the two checkboxes is now also remembered in the INI. Added : Drag and drop support for folders. Changed: Some internal code changes. Changed: Hot character for the buttons to be consistent (now all are set to the target format). 2008 05 28 - 0.12 Added : Support for WAV2MP3 conversion, using LAME. Added : Support for dragging files on the buttons (thanks patto). Added : INI file - to remember last folder, last window coordinates and to set MP3 quality and artist ID3 tag. Changed: Status text to marquee progress. Changed: We will no longer erase the converters executables from the windows temporary folder, in order to allow a faster load time. 2008 05 27 - 0.11 Fixed : Names with spaces were not supported... 2008 05 27 - 0.10 Initial Release
