In life, when we take colored photos, there may be some debris that affects the beauty of the entire photo. If the clutter is not too complex, we can eliminate it in simple ways.
Original picture
final effect
1. Open the original image material, cut out the character part first, and copy it to a new layer as shown in Figure 1.
<Figure 1>
2. Return to the background layer, use the pen tool to outline the clean wooden part shown in Figure 2, and copy it to a new layer.
<Figure 2> 3. Copy the outlined wooden board to one layer, move it horizontally, and align the two wooden boards. You can add a layer mask to the edge and use a black brush to rub some transition effects. In the same way, extend the wooden board a little, and then draw these wooden boards. The layers are merged into one layer.
<Figure 3>
4. Attach the finished wooden board to the chair, first attach the left one as shown in Figures 4 and 5, and then modify the overall defective parts later.
<Figure 4>
<Picture 5> 5. Use the same method to make the right part of the wooden board. The nails in the corner parts can be copied from the above. The effect is as shown in Figure 7.
<Figure 6>
<Figure 7>
6. Return to the background layer, use the Lasso tool to outline the area shown in Figure 8, press Ctrl + Alt + D to feather 5 pixels, press Ctrl + C to copy, create a new layer and press Ctrl + V to paste.
<Picture 8> 7. Move the copied grass to the area shown in the picture below, and erase the excess part with an eraser. The rough effect on the left is shown in Figure 10.
<Figure 9>