-
Oracle 11g DataGuard 配置
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
一、測試環境準備
1.主庫和備庫oracle版本一致,運作在相同平台如linux,伺服器硬體可以不一樣。
2.Primary 資料庫必須運行於歸檔模式,並且務必確保在primary 資料庫上開啟FORCE LOGGING,以避免使用者透過nologging 等方式避免寫redo 造成對應的操作無法傳輸到standby 資料庫。
3.Primary 和standby 資料庫皆可套用於單一實例或RAC 架構下,且同一個data guard 配置可以混合使用邏輯standby 和物理standby.
4.建議資料庫必須採用相同的儲存架構。例如儲存採用ASM/OMF 的話,那不分primarty 或是standby也都需要採用ASM/OMF。
5.standby函式庫的環境和primary一致。
二、調整主庫
1.將主資料庫改為強制產生日誌模式
alter database force logging;
2. 建立密碼
orapwd file=$ORACLE_HOME/dbs/orapwtest password=test entries=3
3. 修改主庫的初始化參數
db_unique_name ='test01'
db_name指定資料庫的名稱,db_unique_name指定了資料庫(主庫和備庫)的不同名稱,是對db_name的唯一的識別。其實是為了區分db_name名稱一樣的資料庫,方便應用和管理。是10g以後的參數。
log_archive_config='DG_CONFIG=(test01,test02)'
test01,test02是.db_unique_name
log_archive_dest_1='location=/u01/app/oracle/arch/test/ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=test01'
log_archive_dest_2='SERVICE=test_db_02 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=test02'
確定log_archive_dest_state_1
log_archive_dest_state_1= enable #預設就是enable
log_archive_dest_state_2= enable
/*以下部分為主機切換為備庫使用*/
fal_server=test_db_02
fal_client=test_db_01
standby_file_management=auto
#如果主備庫檔案或路徑不同
db_file_name_convert='/u01/app/oracle/oradata/test','/u01/app/oracle/oradata/test'
log_file_name_convert='/u01/app/oracle/oradata/test','/u01/app/oracle/oradata/test'
建議參數檔案使用spfile,這樣可以在不停庫使用指令修改參數。
4. 確保資料庫運行在archivelog模式下
SQL> archive log list
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 2
Current log sequence 4
把資料庫調整為archivelog模式下
SQL> shutdown immediate
SQL> startup mount
SQL> alter database archivelog ;
SQL> alter database open;
5.在主庫上建立備用日誌(為切換而用)
alter database recover managed standby database cancel;#未執行
SQL>ALTER DATABASE ADD STANDBY LOGFILE GROUP 4 SIZE 50M;
SQL>ALTER DATABASE ADD STANDBY LOGFILE GROUP 5 SIZE 50M;
SQL>ALTER DATABASE ADD STANDBY LOGFILE GROUP 6 SIZE 50M;
mkdir -p /u01/app/oracle/standby/test
SQL>alter database add standby logfile group 4('/u01/app/oracle/standby/test/stdby_redo04.log') size 50M;
SQL>alter database add standby logfile group 5('/u01/app/oracle/standby/test/stdby_redo05.log') size 50M;
SQL>alter database add standby logfile group 6('/u01/app/oracle/standby/test/stdby_redo06.log') size 50M;
SQL>alter database recover managed standby database disconnect from session;#未執行
三、創建standby database
1. 在standby database 建立pwdfile
orapwd file=$ORACLE_HOME/dbs/orapwtest password=test entries=3
密碼要與primary database相同
2. 修改standby database初始化參數與primary database不同的參數如下:
db_unique_name=test02
log_archive_dest_1='location=/u01/app/oracle/arch/test valid_for=(all_logfiles,all_roles) db_unique_name=test02'
log_archive_dest_2='service=test_db_01 ARCH ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=test01'
fal_client='test_db_02'
fal_server='test_db_01'
db_file_name_convert='/u01/app/oracle/oradata/TEST01/datafile','/u01/app/oracle/oradata/TEST02/datafile'
log_file_name_convert='/u01/app/oracle/oradata/TEST01/onlinelog','/u01/app/oracle/oradata/TEST02/onlinelog', '/u01/app/oracle/flash_recovery_area/TEST01/onlinelog','/u01 /app/oracle/flash_recovery_area/TEST01/onlinelog'
修改完後用如下語句查看
SQL> select * from V$DATAGUARD_CONFIG;
DB_UNIQUE_NAME
-------------------------------------------------- ----------------------------------------
test01
test02
4.建立好對應目錄,dump檔案目錄,資料檔目錄,歸檔目錄
mkdir -p /u01/app/oracle/oradata
mkdir -p /u01/app/oracle/flash_recovery_area
mkdir -p /u01/app/oracle/arch/test
5. 設定standby database的listener.ora 和tnsnames.ora檔案同主函式庫重起監聽並檢驗是否可以tnsping通
6. 啟動standby database到nomount狀態
SQL> startup nomount
7. 用RMAN的duplicate功能建立standby database,11g可以不做備份直接複製到備庫:
RMAN> rman auxiliary /
connect target sys/test@test_db_01
duplicate target database for standby dorecover nofilenamecheck;
檢查standby database的狀態
SQL> select database_role,protection_mode,protection_level from v$database;
SQL> select sequence# ,applied from v$archived_log order by sequence#;
8.開始Redo應用主庫
SQL> alter system archive log current;
備庫,11g可以只讀開啟庫應用程式日誌
SQL> alter database open read only;
SQL> alter database recover managed standby database disconnect from session;
也可以使用alter database recover managed standby database using current logfile disconnect from session;來套用日誌。
沒有using current logfile是去apply standby archived log.
有using current logfile是當日誌傳到standby redo log的時候就去應用,是real-time的,必須要有standby redo log.
四.備用伺服器的管理模式與唯讀模式
1.啟動到管理模式
SQL>shutdown immediate;
SQL>startup nomount;
SQL>alter database mount standby database;
SQL>alter database recover managed standby database disconnect from session;
2.啟動到唯讀方式
SQL>shutdown immediate;
SQL>startup nomount;
SQL>alter database mount standby database;
SQL>alter database open read only;
(3)如果在管理恢復模式下到唯讀模式
SQL> recover managed standby database cancel;
SQL> alter database open read only;
這個時候,可以為資料庫增加臨時資料檔案(這個在熱備份的時候是沒有備份過來的)
如
alter tablespace temp add tempfile '/u02/oradata/test/temp01.dbf' size 100M;
5.從唯讀方式到管理恢復方式
SQL> recover managed standby database disconnect from session;
五.主備切換主庫
lsnrctl stop
SQL> alter database commit to switchover to physical standby with session shutdown;
SQL> shutdown immediate;
SQL> startup mount;
SQL> alter database recover managed standby database disconnect;
lsnrctl start
備庫
SQL> alter database commit to switchover to primary;
SQL> shutdown immediate;
SQL> startup
六.附件以下是設定檔內容:
listener.ora
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle6)(PORT = 1521))
)
tnsnames.ora
TEST_DB_02 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.202.5)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = test02)
)
)
TEST_DB_01 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.202.6)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = test01)
)
)
pfile
test.__db_cache_size=1526726656
test.__java_pool_size=16777216
test.__large_pool_size=16777216
test.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
test.__pga_aggregate_target=1342177280
test.__sga_target=2013265920
test.__shared_io_pool_size=0
test.__shared_pool_size=436207616
test.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/test/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/test/control01.ctl','/u01/app/oracle/oradata/test/control02.ctl','/u01/app/oracle/oradata/test/ control03.ctl'
*.db_block_size=8192
*.db_domain='greatsky.com'
*.db_name='test'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.db_unique_name='test01'
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=testXDB)'
*.fal_client='TEST_DB_01'
*.fal_server='TEST_DB_02'
*.log_archive_config='dg_config=(test01,test02)'
*.log_archive_dest_1='location=/u01/app/oracle/arch/test/ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=test01'
*.log_archive_dest_2='SERVICE=test_db_02 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=test02'
*.memory_target=3347054592
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.service_names='test.greatsky.com','test01.greatsky.com'
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'