Super simple development method: directly surround a large pool with insulating bricks. That's it. As long as the pool is large enough to cover the dormant period, it should be noted that the edge of the pool is higher than the spring, so that the liquid will not Overflow, hand pumps and liquid pumps need to pay attention to the overheating temperature, and the self-flow high-pressure library: the first step is to build the frame, the second step is to construct the two gases, and the third step is to build the remaining buildings.
Details of the construction method of the water spring development module in "Hypoxia"
In the case of non-tuning, almost all water springs can be developed using this method (you can just pretend that there are no carbon dioxide springs, regardless of the low temperature, it cannot lower the temperature a little)
Super simple development method
Just use insulating bricks to surround a large pool. That's it, as long as the pool is big enough to cover the use during the dormant period, because the reason is very simple. If the water in the pool cannot be used up during the dormant period, then no matter how much high-pressure storage is needed It has no real meaning, and the most important thing in this game is space, so it can be like this.
It should be noted that the edge of the pool is higher than the spring, so that the liquid will not overflow (overpressure will stop eruption). The hand pump and liquid pump need to pay attention to the overheating temperature. For example, if the salt water spring is 95°C, then the liquid pump will At least it should be built with gold amalgam. The top can be closed again to prevent other liquids from mixing into the pool. The size of the pool is arbitrary, as long as it is big enough.
Artesian high pressure library
Of course, many friends will think that this is too sloppy, covers too much area, and does not know how much space to reserve. The high-voltage library can solve these problems relatively brainlessly. Let me reiterate my point of view. Any form of high-voltage library is just a means and not an end. Don't feel that it is necessary to use a high-voltage library.
Let me talk about the specific construction method, it is very simple. (It is best not to do it when the spring is erupting. Try to choose a dormant period, and make sure your little one wears a pressure suit, otherwise you will accidentally burn him to death)
The first step is to build the frame
The second step is to construct two gases
After you build the frame, there may or may not be liquid in it. It doesn't matter. Let's open the material overview and take a look at the gases first. Because the springs are in the wild, there is a high probability that after you build the frame, it will naturally contain two or more gases. .
We are very lucky here. There are two kinds of gases, hydrogen and carbon dioxide (as long as they are different ones, it doesn’t matter what they are). When encountering this situation, it is very simple. Pour some corresponding liquid in the spring (if it is exposed in the wild) The spring itself has it), if this happens in the end, it will be considered a success.
If not, it's very simple. We use a gas pump to pump two different gases from the outside. This can be made casually and does not need to be exactly the same as the one in the picture. It is just a demonstration.
As long as there are different gases in the two pipes framed in the picture, pause the game immediately, and then use the scissors tool in the lower right corner to separate these two cells.
This is what it looks like after cutting, which is equivalent to setting aside two pipes containing different gases here.
Then make sure that when there is liquid in the upper spring, just dismantle the two pipes. Naturally, the gas will be stuck here (it is best to have lighter gas at the top and heavier gas at the bottom)
The third step is to build the remaining buildings. Pay attention to the materials for the liquid pump. Gold amalgam is needed for high temperature environments. It is best to add a hydraulic sensor and set a control liquid pump greater than 2000Kg to avoid damaging the two-layer gas structure after pumping out the liquid. The electric wires and water pipes can be connected casually. It is best to use insulated pipes, and lead can be used for the wires.
Wires can also be connected through the gap with thick wires.
Basically, all kinds of water springs can be developed in this way. Generally, water springs in the wild do not need to be specially blocked for gas. Once they are built, they will be blocked naturally. You cannot manually construct them using the method I mentioned above. (If there is gas stuck inside, just use the method of building bricks and removing bricks to squeeze it out. It is best to lock the airlock after building it)