Original picture
Final effect 1. First, create a new layer 1 and use a pressure-sensitive pen to draw the face. The color I used is: R246.G207.B176. Of course, this does not need to be too careful. You can just trace the face in the center of the face. You can increase the pressure and apply directly. In order to make the edges look less stiff, just reduce the pressure of the pressure-sensitive pen when drawing the edges, as shown in <Picture 1>
<Figure 1>
2. After the drawing is completed, use the included wireless mouse to click the change mode drop-down menu in the layer panel, and select the color mode in the pop-up drop-down menu. You will get this effect. It feels almost the same, but... MM's eyes are different. It has turned yellow, which will make people think she is sick. What a pity that such a PL girl has yellow eyes! Use an eraser to erase the eyes in layer 1. When painting the corners of the eyes, use a pressure-sensitive pen to lightly smear it. Increase the pressure on the middle part. The pressure-sensitive technology of the pressure-sensitive pen The pressure-sensitive technology that allows us to easily complete the pressure-sensitive pen makes the entire application process more convenient and precise. In the past, this application process might have taken several times more time than it does now, haha! In this way, the beauty’s original dazzling and beautiful eyes are restored, as shown in <Picture 2>
<Picture 2> 3. Create a new layer 2, use the same method to draw the lips, it is much more convenient to use a pressure-sensitive pen, and also use the color mode (hehe, don’t laugh at me, drool while doing it...) such as < Figure 3>
<Figure 3>
4. Create a new layer 3 and use the green brush to draw eye shadow. At this time, the drawing tablet comes in handy. When drawing, the pressure-sensitive technology of the pressure-sensitive pen allows us to easily obtain such eye shadow lines. Draw such thick lines. When it comes to thin lines, as long as the strength of the hand is increased from heavy to light, you can get such a line (the stronger the strength of the hand, the thicker the line drawn, don’t say I didn’t tell you in advance) At the inner corner of the eye, we Increase the pressure and when drawing to the outer corner of the eye, slowly reduce the pressure on the pressure-sensitive pen to get the eyeliner as shown in the picture. In this way, efficiency is greatly improved. When drawing, the feeling of pressure when holding the pen is very important. If you feel that the effect is not good, you can use the two sets of shortcut keys "Ctrl+Z" or "Ctrl+Alt+Z" to quickly undo the wrong step. As shown in <Figure 4>
<Figure 4>
Use Gaussian Blur, and then change the layer blending mode to Color Mode, (don't tell me I don't know where the Gaussian Blur filter is)
When using the Gaussian Blur filter, I used a pixel size of 15.
This can be determined based on the size of the eyeshadow you apply, there is no fixed value.
In this way, MM becomes much more beautiful, but... her eyes also turn green. Isn't that what we often call green light?
Hehe... don't be afraid, just use the previous method to erase the position of the eyes in layer three. .
5. Create a new layer 4 and use a red brush to draw two random strokes on MM’s face as shown in <Picture 5>
<Figure 5>
6. Use Gaussian blur to try it out...
The fuzzy value should be larger! I used 30 pixels here, and then changed the layer blending mode to color.
In this way, the face becomes rosy! Ha ha
~~~Not bad! (Figure 6)
<Picture 6> 7. Use the same method to color the hair, remember to use Gaussian blur....
And you should have whatever color hair you want (Picture 7)
<Figure 7>
After using the perfect combination of Paint II drawing tablet and PS, I feel that the whole process of drawing selections is so easy and gets twice the result with half the effort.