This article was originally created by Hongyan Nanfei, a Chinese tutorial website. Please keep this information when reprinting!
Let’s take a look at the original pictures and renderings first
Step 1: First observe the RGB channel. It is found that the red channel image is clear and the light and dark transition is very smooth and good. Copy a red channel. Ctrl+L pops up the levels panel and enter 20 1 255 respectively as shown in the figure.
Step 2: Ctrl+A selects all the red copy channels. Ctrl+c copies. Then click on the RGB channel. Return to the layer panel. Crtl+V paste and set the layer blending mode to screen. Add a mask. Set the foreground color. It is black. Adjust the appropriate opacity and use a brush to paint out the areas that do not need to be whitened. The effect is as shown:
Step 3: The whitening effect is achieved. But the overall color is not right. It’s a bit pale! Hold down the Ctrl key and click the mask of the layer to bring up the selection and add a hue and saturation adjustment layer, respectively +5 +30 0, as shown in the figure :
Step 4: Add a Curves adjustment layer. Just make the light and dark look comfortable.
Finally, press Ctrl+Alt+Shift+E to add a stamp layer and adjust the overall feel.
Hehe... let’s see if Goo Jai has turned into a butter boy again!
This method is also very simple to adjust the color cast. Below is a classic original picture from Tutorial.com
Let’s look at the effect again.