The impression of crystal is that of crystal clear, cold, fragile and clear. Using crystal to create various images is a unique art creation technique. When you calm down and carefully appreciate crystal art, you will find that they have a unique charm. . Next we will use Photshop to create an exquisite crystal beauty
1. Open the material picture (provided at the end of this article), cut out the character, name it "Real Portrait", move and copy it to the blue background (background layer).
Copy the "Real Portrait" of the portrait three times and name it: "Liquid Man" and "Layer 2". The order of the layers from top to bottom is: Real Portrait - Liquid Man - Layer 2 - Layer 3 as shown below. Shown:
2. Select "Liquid Man" and execute: Filter--Sketch--Ming Huang. In the pop-up "Ming Huang Gradient" dialog box, set the detail to 5 and the smoothness to 7.
3. Set the blending mode of the "Liquid Man" layer to "Overlay" and temporarily hide "Layer 2". The effect is as shown in the picture below.
4. On the "Layer 2" layer, execute: Filter--Stylize--Lighten the Edge, and set the parameters in the pop-up "Lighten the Edge" dialog box: Edge Width: 2 Edge Brightness: 0 Smoothness: 5
5. Set the blending mode of "Layer 2" to "Screen" and temporarily hide "Liquid Man" and "Layer 3". The effect is as shown in Figure 11.
6. Display all layers, select the portrait covered behind the liquid man, which is "Layer 3", press "Ctrl+U" to check the coloring check box in Hue/Saturation, and other setting parameters are shown in Figure 12
7. Select "Layer 2", press "Ctrl+U" to pop up the "Hue/Saturation" dialog box, check the coloring check box, and other setting parameters are shown in Figure 14
Hide the "Liquid Man" and "Layer 3" observation effects, as shown in Figure 15
8. Select "Liquid Man", press "Ctrl+U" to pop up the "Hue/Saturation" dialog box, check the coloring check box, and other setting parameters are shown in Figure 16
Effect:
9. Open a picture of "seabed ripples"
10. Place "Undersea Ripples" on top of "Liquid Man", "Layer 2" and "Layer 3", erase the areas other than the portrait with an eraser, reduce its transparency accordingly, and add a transparent white gradient: And set the blending mode: "Multiply" until the following effect is achieved
11. Then merge the layers "Liquid Man", "Layer 2", "Layer 3" and "Undersea Ripples"
Finally, use the deepening tool to deepen the neck area to achieve a realistic three-dimensional effect:
