This article was originally created by ゞQingyun ヅYuyan from China Tutorial Network.
Original picture: (Picture comes from the Internet)
Rendering:
The processing method is as follows:
1. Open the picture in Photoshop and copy it one layer
2. Image-Adjustment-Match Color (check Neutral and leave the others unchanged)
Figure 1
The effect after matching colors:
Figure 2
3. Image-Apply image (previously, the green channel or other channels were checked. This time, the RGB channel was checked)
Figure 3
The effect after applying the image:
Figure 4
4. At this time, the watery effect is almost achieved. Then we use the Neat Image in the filter plug-in to reduce the noise. I won’t say more about how to use it.
If you don't have that plug-in, you can grind the skin manually.
Figure 5
The effect after microdermabrasion:
Figure 6
5. Although this skin resurfacing method is very popular, it also has its shortcomings. Then we will use the blur tool to deal with the shortcomings.
6. Duplicate another layer. Execute Image-Adjustment-Decolorize
Figure 7
7. Image-Adjustment-Invert
Figure 8
8. Change the layer’s blending mode to: Color Dodge
Figure 9
9. Filter-Others-Minimum
Figure 10
10. Pull down the blending options. Hold down ALT and pull the four triangles to the end.
Figure 11
11. At this point the effect comes out
Figure 12